Home > IGBT Power Modules >

TO-263 LM2596S DC DC Power Modules LM2596S-ADJ ADJ Step Down

Product Categories

FFP2 Dust Mask [9]
KN95 Dust Mask [10]
N95 Dust Mask [3]
Semiconductor Integrated Circuit [237]
N Mosfet Transistor [223]
IGBT Power Modules [29]
Body Infrared Thermometer [7]
Protective Face Shield [7]
Disposable Medical Gowns [6]
Disposable Protective Suit [4]
Instant Hand Sanitizer [6]
Disposable Protective Gloves [6]
Disposable Head Cover [8]
Disposable Shoe Cover [5]
Medical Safety Goggles [5]

Shenzhen Quanyuantong Electronics Co., Ltd.

Contact Now

TO-263 LM2596S DC DC Power Modules LM2596S-ADJ ADJ Step Down

Ask Lasest Price
Model Number :	lm2596s-adj Module
Brand Name :	Original
Price :	$0.48
Delivery Time :	1-7 days
Payment Terms :	T/T, Western Union, Paypal,Alibaba trade order
Supply Ability :	859000PCS/Day

Add to Cart

Product Details
Company Profile

TO-263 LM2596S DC DC Power Modules LM2596S-ADJ ADJ Step Down

Product Detail

Feature
Module Type	Non-isolated buck (BUCK)	Rectification method	Asynchronous rectifier
Input voltage	3.2V-40V	Output voltage	1.25V-35V
Output current	3A(max)	Conversion efficiency	92%(highest)
Switch Frequency	150KHz	Output ripple	30mV(max)
Load Regulation	±0.5%	Voltage Regulation	±2.5%
Operating temperature	-40℃ TO +85℃	Size	432114(mm)

Precautions:
Long-term work is recommended to use current within 2.5A, plus heat sink (10W output or more); Because it is a step-down module, in order to ensure output stability, please maintain a minimum 1.5V differential pressure.

* This module is an adjustable step-down module that can be used to change the output voltage by adjusting the blue adjustable resistor on the module. The input and output voltage difference is 2V, and the minimum output voltage is 1.25V.
* The IN- (input negative), IN+ (input positive), OUT- (output negative), and OUT+ (output positive) indicated on the module must be connected correctly. Otherwise, the module may be damaged.
* This module has no output short circuit protection. If the output is short circuited for a long time, the module may be damaged.

Voltage regulation:
Connect the power supply (4-35V), adjust the blue potentiometer knob (usually rotate the clockwise to boost, counterclockwise to rotate the buck) and use a multimeter to monitor the output voltage to reach the required voltage.

Wiring:
1. Solder, directly solder the power cord to the input (output) port
2. The soldering pin can be inserted into the hole through the lead wire or inserted into the hole plate; or the PCB can be directly soldered after the pin is added.

Product Tags:


*From:	Your email address is incorrect!
*To:	Shenzhen Quanyuantong Electronics Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!